System Check Without Network Connection

To check your system, complete the following steps:

Please note: The system doesn't produce at night time.

For inverters without an LCD display:

1. Look for the LED indicator light at the bottom of the inverter
2. look for the green LED: when it is on, the system is producing power, if it is flashing, this means the inverter has AC power, and is in Standby mode.
   

For inverters with an LCD display:

1. Press and quickly release the green button to activate the LCD screen, repeat until the screen appears.
2. Check your inverter’s production information.

• P_OK indicates that the inverter is communicating with the Power Optimisers.
• Pac [XX] indicates the nominal value of production in watts.

SolarEdge highly recommends connecting your system to the SolarEdge monitoring platform.
This will enable your installer to provide enhanced PV performance monitoring
and yield assurance through immediate fault detection and alerts at the module level, string level, and system level.

Should you require further assistance, we recommend that you first contact your installer.